Operation and use of peanut sheller

Peanut has high economic value. Peanut seeds can be made into peanut oil and other health food, peanut shell can be made into a variety of building materials and the market demand is vigorous. Since manual shelling of peanuts is time-consuming with low labor efficiency that it can not adapt to the market demand. Using peanut sheller is the inevitable trend of peanut mechanization and the main link of peanut production mechanization.

 

Peanut sheller, consisting of the shelling part, vibrating screen, frame, engine cover, motor, blower and drive mechanism, has the advantages of compact structure, easy operation, high production efficiency and low price. Through nearly two years of promotion test, certain effect has been obtained, and technical specification the mechanization of peanut shelling is summed up, which laid a solid technical foundation for healthy and orderly development of peanut shelling industry.

Requirements for groundnut sorting and stacking:

The peanuts to be shelled shall be sorted according to different sizes and placed in a concentrated pile at the site next to the peanut sheller on a higher ground. The accumulation thickness is 0.5-0.7m, and according to different moisture content, the peanuts shall be air-dried or humidified to make the moisture content reach 8%-13% before shelling.

 

Operation requirements for peanut sheller

1. Requirements for peanut sheller.
Clean shelling and high productivity. The material should be free of iron, stone and other hard impurities. The peanut sheller equipped with cleaning device should have a high degree of cleanliness. The loss rate and breakage rate should be low. It can be used for shelling many kinds of crops to improve the utilization rate.
2. Requirements for peanuts (nuts).
The moisture content of peanut should be suitable. Low moisture would lead to high crushing rate, while high moisture would affect the working efficiency.
3. When the peanut sheller needs to be stopped, stop feeding for 3-5 minutes and then let the material in the cleaning warehouse gets empty before stopping. If there is an emergency shutdown for some reason, when the machine is started again, the cleaning machine should be started first, and then the fan should be turned on and feed after normal operation.

Some requirements for correct use of peanut shelling machine
The power selection of peanut shelling machine
Why is the belt of peanut sheller machine easy to loosen?
The structure of scraper peanut shelling machine
How to choose the fan of peanut shelling machine
Factory direct small peanut shelling machine
How to prevent rust during storage of peanut shelling machine