Take notice of the temperature of each component when the peanut shelling machine is working

Peanut shelling machine is often used to shell the peanut and keep the peanut kernel intact through high-speed rotation of the engine body. In the regular use of peanut shelling machine, the operator should always pay attention to the temperature of all parts. Since high temperature of some components is a forewarning to the damage of the parts.

The series of peanut shelling machine produced by KMEC peanut machinery adopts triangle belt for transmission. The belt would be extended and loose due to the tension for a long time. Once the temperature of the belt pulley is found higher, the operator need to check whether the belt is slipping. Tensioning or replace it according to the situation so as not to cause too low speed of the peanut shelling machine. The operating temperature of the motor should not exceed 60℃. If the temperature of motor is too high, the operator should immediately stop the machine and check the circuit and ensure the voltage reaches 380V, while the two phase motor should reach 220v. The bearing temperature should not exceed 25℃. If the bearing temperature is too high, the operator should immediately stop and check whether the bearing is damaged so as to avoid greater losses. Above information is for reference only, contact us for more details.

Peanut shelling machine provided by our company combines the function of peanut shelling and shell and kernel separation with the features of simple structure, convenient operation, low power consumption and lower noise. Warmly welcome customers to purchase our products.

Some requirements for correct use of peanut shelling machine
Italian customer purchased two sets of peanut sheller
Why is the belt of peanut sheller machine easy to loosen?
The power selection of peanut shelling machine
How to choose the fan of peanut shelling machine
Factory direct small peanut shelling machine
How to prevent rust during storage of peanut shelling machine