Temperature requirements of parts of peanut shelling machine when working

Peanut shelling machine is a professional equipment used to remove nuts such as peanuts. When using the peanut shelling machine, we should always pay attention to the temperature of each component. If the temperature of the component is too high and the operator does not handle it in time, it will probably cause great damage to the machine and affect the normal operation of the peanut shelling machine.

Peanut shelling machine uses V-belt drive. When the belt is used for a long time, it will gradually stretch and relax due to the pulling force. If the temperature of the pulley is found to rise, it is necessary to check whether the belt slips or not, and tighten or replace it according to the situation, so as to avoid the low rotation speed of peanut sheller machine for sale.

The working temperature of the motor of peanut shelling machine should not exceed 60 degrees Celsius. If it is found that the motor temperature is too high, it is necessary to immediately stop and check the circuit to ensure that the voltage reaches or approaches 380v, and the two-phase motor needs to reach 220v .

The bearing temperature of peanut shelling machine should not exceed 25°C. If it is found that the bearing seat temperature is too high, stop the machine immediately to check whether the bearing is damaged, so as not to cause greater losses.

In a word, during the use of peanut shelling machine, the abnormal temperature rise of various parts is also an index worthy of attention. We need to pay attention to it, so as to avoid the damage to the machine caused by the rise of machine parts and affect the normal use of peanut shelling machine.