Peanut sheller machine is a kind of mechanical equipment used to remove peanut shells. In the use of peanut sheller, lubrication is very necessary, and the function of lubrication is mainly reflected in the following aspects:
On May 11, the client from Nigeria ordered one set of peanut sheller (model 70) from our company. Our peanut sheller is produced according to the national standards strictly.
In the process of using the peanut shelling machine, feeding of peanuts should be uniform with 20 to 30 kg/min. If too many peanuts are found in the second blower and block the machine, the feeding amount should be reduced and the impurity removing door in the lower part of the blower should open.
Zhenyang county actively promotes peanut machinery operation and the products covering planting, harvesting, pretreating and other links.
Recently, a customer from Senegal purchased two sets of peanut sheller (model BH-4500A) and one set of peanut grading sieve (two layers) from our company on September 28th, 2016.
Bk-700 peanut sheller adopts triangle belt transmission. New belt would be stretched and get loose gradually by tensile force after using for a period of time.
In peanut oil extraction process, the purpose of peanut shelling is to improve the yield efficiency and the quality of crude peanut oil and cake, good for the subsequent process such as flaking and comprehensive utilization of peel and shell.
Aiming at the advantages and shortcomings existing in peanut shelling machine, the study summarizes the experience of the application of peanut shelling machine in production to continuously improve its function in the future development and make it to present a good momentum of development.
The bearing of peanut sheller should be checked timely. Once wear or oil starvation is found, the operator should refuel or replace the bearing timely.
The centralized agriculture is only developed in few places of western China and the three provinces in the northeast of China. This requires that the development of agricultural machinery including the peanut sheller must be diversified and specific.
The peanut sheller adopts triangle belt transmission. New belt would be stretched and get loose gradually due to the tension after using for a period of time. Adjustment should be made according to the situation.
Scraper groundnut shelling machine, also known as bar-cage sheller before, is a mechanical equipment to crush the shell of groundnuts through extrusion and impact of scraper on the axis of rotation and the cage bar.
In the daily use of peanut sheller, correct operation can achieve the best effect of the peanut sheller. The following points should be followed:
In the regular use of peanut shelling machine, the operator should always pay attention to the temperature of all parts. Since high temperature of some components is a forewarning to the damage of the parts.
The emergence of peanut shelling machine has changed this situation to a great extent, so that farmers no longer need to use the most primitive method for shelling, thus greatly reduce the user's physical labor, also improve the efficiency of peanut shelling.
In recent years, with the expansion of planting area of peanut, the number of users purchasing peanut shelling machine is increasing. Compared with manual shelling, the mechanical shelling machine can largely reduce labor work of farmers, which saves a lot of manpower and greatly improves the work efficiency.
Before operating the peanut sheller for shelling, the operating personnel must be trained with safety education and familiar with the structure, performance and operation method. Personnel participate in the shelling operation should wear work clothes.
There are some details need to pay attention in the operation of peanut shelling machine. Generally speaking, in the operation process of peanut sheller, the operator should always pay attention to the speed, sound and bearing temperature. In case anything abnormal.
Check the assembly of all parts, whether each part is connected firmly and reliably and whether the belt tension is moderate. If the belt is too loose, it will slide, which may influence the yield and quality; while too tight can cause the overtemperature of the bearing.
Methods of application and precautions: Before using the peanut sheller, check whether the fastener is tightened, the rotating part is flexible and each bearing has lubricating oil or not first. Put the peanut sheller on a stable ground.
When storing peanut shelling machine after using, remove the dust and dirt in the appearance and internal residual grain and other debris. Clean each part of the bearing with diesel and spread with butter after drying. Repaint the enameled parts of the peanut shelling machine.
During the shelling process, there are a lot to be noticed when using the peanut sheller, the following are the main points.
The KMBK series of peanut sheller is the professional equipment for peanut shelling. The machine has the functions of peanut shelling and shell and kernel separation with the features of simple structure, convenient operation, low power consumption, lower noise, etc.
Peanut shelling machine is a kind of commonly used agricultural machinery. You may probably know its usage according to its name, but not that clear about the structure and working mode of peanut sheller. So let's take a closer look at the characteristics of the peanut sheller.
First of all, peanuts fall in the coarse grid first through artificial feeding. Due to therubbing force of the board rotation and the fixed grid concave plates, the peanuts would be shelled. Peanut kernels and shells after separating would fall from the grid.
When is the optimum time to shell the peanut seeds and what problems should be paid attention to when shelling? Here is a brief introduction:
The peanut sheller is a multi-functional peanut shelling machine with compact structure, easy operation, stable and reliable performance and high shelling efficiency.
Peanut shelling machine is the machine to shell peanuts and keep peanut kernels intact through high-speed rotation of the body. With the widely application of peanut machinery and continuous development of the market, the peanut shelling machine has been widely used.
Peanut shelling machine is the machinery to remove the shell of peanuts to get peanut kernels. Due to the characteristics of the peanut itself, the peanut shelling machine can not used for joint operations with peanut field harvesting. It can only be used after the moisture content of peanuts reducing to a certain degree.
If you're interested in our products or have any questions, please let us know. Don't hesitate to contact us!
Kate Road, Anqiu City, Shandong province, China.
Call us: +86-372-5388851
info@chinapeanutmachinery.com
